EN
14
Channel Skip
When using
/
, the channel you selected will be
skipped.
4
Use
K
/
L
to select
[Skip]
, then press
OK
.
•
will appear on the right of the channel.
Channel Delete
The channel you selected will be deleted from the channel
list.
4
Use
K
/
L
to select
[Delete]
, then press
OK
.
• Delete confirmation message will appear.
5
Use
K
/
L
to select
[Delete]
, then press
OK
.
Channel Lock
You can set particular channels to be invisible.
4
Use
K
/
L
to select
[Lock]
, then press
OK
.
5
Use
the Number buttons
to enter the 4-digit
PIN Code you set.
•
will appear on the right of the channel.
Channel Move Up / Move Down
You can change the channel order.
4
Use
K
/
L
to select
[Move Up]
or
[Move Down]
, then
press
OK
.
Channel Decode
Some TV stations transmit encoded TV signals which can only
be viewed with a purchased or hired decoder. You can
connect such a decoder to SCART jack of the unit. This
function will automatically activate the connected decoder for
the channel.
4
Use
K
/
L
to select
[Decoder]
, then press
OK
.
•
will appear on the right of the channel.
Channel Scan
You can scan the channel in your area automatically or search
and store channels manually.
1
Use
K
/
L
to select
[CHANNEL]
, then press
OK
.
Auto Scan
2
Use
K
/
L
to select
[Auto Scan]
, then press
OK
.
• Auto scan confirmation message will appear.
3
Use
K
/
L
to select
[Start]
, then press
OK
.
• Channel scanning will start.
Manual Scan
2
Use
K
/
L
to select
[Manual Scan]
, then press
OK
.
3
Use
K
/
L
or
the Number buttons
to select the
channel number you want to scan, then press
OK
.
• Channel scanning will start.
3
Use
K
/
L
to select
[Channel]
, then press
OK
.
4
Use
K
/
L
or
the Number buttons
to select the
channel number you want, then press
OK
.
5
Use
K
/
L
to select
[Frequency]
, then press
OK
.
6
Use
the Number buttons
to select the 3-digit
frequency, then use
K
/
L
to start scanning.
7
After channel scanning is completed, press
OK
to select
the following settings. (
[Colour System]
,
[Sound System]
, and
[Fine Tune]
)
• Press
OK
again to cancel, and
will disappear.
• When you select the locked channel, you need to enter the PIN
Code to watch.
• If you want to unlock the locked channel, select
[Lock]
by using
K
/
L
, then the PIN Code again.
• When your country selection is
[France]
,
[Portugal]
,
[Italy]
,
[Hungary]
,
[Estonia]
, or
[Latvia]
at “Initial Setup” (p. 7), and you
select DTV channel, the channel order will be changed. If ATV
channels or any other countries, the channel number will be
switched.
• Press
OK
again to cancel, and
will disappear.
ATV
• Digital or analogue channels will be scanned depending on the TV
mode (ATV mode or DTV mode) you selected.
• When the scanning is completed, the lowest memorised digital or
analogue channel will be displayed.
• If you press
MENU
during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
• Please note that after tuning, the analogue channels will be stored
in the order that they are broadcast by your local transmitter.
This may not be in the same order in which you would like them
to be stored. If this is the case, you can change the order according
to your preference at “Channel Settings” (p. 13).
DTV
ATV
1
666
L
Manual Scan
Manual Scan
Channel
Frequency
Frequency
Colour System
Sound System
Fine Tune
MHz
SECAM
Search
Back
PICTURE
SOUND
CHANNEL
OTHERS
LANGUAGE
USB
