PUSHBAR ON ‘DENTRO’ INDOOR FRAME
Pushbar fitting
(Pict. B4)
The ‘Dentro’ indoor frame can be fitted with a pushbar for indoor mobility.
Unscrew the black knobs
A
, slide the bars into the frame holes, screw in and tighten
screws
A.
Removal of pushbar
To remove the pushbar, remove screws
A and pull upwards the pushbar.
Adjustment of pushbar inclination
(Pict. B3)
Loosen screws
B
, adjust the pushbar into the necessary position and height, and then
tighten again the screws.
14
ATTENTION
•
Before all fitting operations, do not forget
to brake
all 4
castors!
•
The ‚Dentro’ indoor frame is not suitable for outdoor
use or
to overcome
obstacles.
•
Mitico system may be used only on safe, even and
regular grounds.
B
Abb. B3
A
Abb. B4
Pict B3
Pict B4
