45° PELVIC BELT
It controls the pelvic area and prevents the childt from sliding forwards.
Fit on the seating unit
(pict P1)
Set the pelvic belt on the seat with the coloured part upwards.
Put the harnesses into holes
Y
of the seat.
Removal from the seating unit
Carry out opposite process to the fitting operations
USE
(pict P2)
Loose lock
44
.
Seat the child properly then close lock
44
. Adjust the straps with their rings
45
according
to the child’s needs.
51
NOTE
Harnesses are produced long to be adjusted according to children’ need.
If the exceeding part is too long, it can be cut and sealed with a small
flame.
Pict. P2
