Lateral position
(pict I3)
Loose bolt
15
with the proper key and
place
the tray to the required position,
according to the sliding mechanism.
Properly tighten bolt
15
and make sure it is safe and tight.
Swing Away
(pict I4)
Loose wing screw
14
, raise the right side of the table and tilt it to left until it is next to
the seating unit MITICO
39
ATTENTION
Maximum
load of
the tray: 5 kg
NOTES
(pict I3)
Depth can be further
reduced
: loose bolt
15
and remove the tray
.
Loose screw from bolt
16
and take off the metal tube from holder
17
.
Turn upside down the holder, fit it into its place and then fit again the tube.
Safely screw in hole
16
, fit again the tray in the holder and tighten bolt.
Pict. I4
15
17
16
Abb. I3
Pict I3
