Footplates
Angle adjustment
(pict M10)
Loosen bolt
34
and angle the single footplate as required. Tighten the bolt.
Height
(pict M8)
Loose bolt
31
and
place
the single footplate at the required height; strongly tighten
the bolt.
Adduction
(pict M8)
Loose bolt
30
and
place
the single footplate as required; strongly tighten the bolt.
Inwards-outwards rotation
(pict M10)
Loose bolts
33
under the footplates and set as required; tighten the bolts again.
46
WARNING
D
o not
position
the child stand on the plates: they are not
designed to support heavy weights.
It is possible to achieve more or less adduction by inverting
the sliding supports. Swap 30B from right to left side and
refit onto 30A.
30B
30A
30B
Abb. M9
33
34
33
Abb. M10
Pict M9
Pict M10