MITICO ROOF
Mitico roof can be fitted on all Mitico seating units with outdoor frames.
It is easy to assemble and very useful outside; equipped with rain protection
covering and joint to allow the roof to be pushed backwards.
Fitting
(Pict C1, C2)
The seating units are equipped with side holes to assemble the two
plastic supports; use the bolts and fix them inside the back support, then fit
the roof by inserting the chromed tubes into the supports.
Removal
Carry out the opposite process to the fitting operations.
Use
A joint to allow backwards movement characterizes the roof.
The rain protection covering
will
be mounted using the apposite
buttons on
the roof.
28
ATTENTION
Each seating unit is equipped with holes at different height to
enable roof to be fitted where needed.
Pict. C1
Pict. C2
