BUMPER BAR
Arm support, adjustable in depth and adaptable to the different positions of the
armrests.
Fit on the seating unit
(pict H2)
Fit the two bar ends in armrest’ holes
Z
and secure with wing screws
J
.
Removal from the seating unit
(pict H2)
Carry out opposite process to the fitting operations.
ADJUSTMENT
(pict H2)
Depth
Loose screws
J
and put into place as required;
fasten the screws again.
37
ATTENTION
If it isn’t possible to fit the bar completely, check that
screws
J
under the armrests are properly loosened.
Be sure that screws
J
are acting upon the bumper bar
ends
Pict. H2
Pict. H1
