SEATING
Depth adjustment
(pict. A4)
Remove all padding. Loose the bolts
P
and place the seat
extension as required. Replace and tighten the bolts.
Width adjustment
(pict. A4)
The gap between the two padded side supports is adjustable
(also asymmetrically). Green disks
M
between the side support
and the steel shell can be easily added and removed. Each disk
is 10mm thick
.
Unscrew bolts
Q
and
R
, insert or take off the disks and
reassemble the part by choosing a suitable bolt for the desired
shell-side support distance. It is necessary to remove the
padding from backrest to carry out these operations. Screws in
different lengths are to be found standard in the packing and
must be used if width adjustments are required.
Once the new width is achieved, refit all of the padding.
10
ATTENTION
(pict A4)
Do not tighten too much bolts
Q
, to avoid
difficult armrests adjustments.
S
R
P
O
M
N
Q
Abb. A4
Pict A4
