®
4)
If installing the sprockets without the plastic sup-
port, install the individual or preassembled sprockets
and the spacers on the sprocket body of the hub
aligning the spline patterns (Fig. 3). The profile of the
freewheel body with two asymmetrical grooves (Fig. 3)
ensures automatic sprocket timing since there is only
one assembly option.
5)
Using a torque wrench (D - Fig. 4) together with the
Campagnolo
®
tool UT-BB080 (B - Fig. 4), tighten the
ring nut (G - Fig. 4) that came with the Campagnolo
®
sprocket pack onto the freewheel body, observing the
tightening torque indicated on the instruction sheet of
the sprocket pack.
3
4
C
B
D
UT -BB080
40 N.m - 29.5 lb.ft
D
G
UT-BB080
B
CLOSE
4.2 - 11s SPROCKETS of Campagnolo s.r.l. (on FW body for 11s sprockets of Campagnolo s.r.l.)
4.2.1 - ASSEMBLY
G
H
A
A
G
2
1)
The sprockets are pre-assembled and timed on the
plastic support (A - Fig. 2). The ring G (Fig. 2) is provi-
ded with a preassembled washer (H); ensure that it is
positioned as in fig. 2.
2)
Remove the ring (G - Fig. 2).
3)
Insert the support on the side of the freewheel
body, align the spline patterns, press the sprockets
onto the freewheel and extract the support (A) from
the hub (Fig. 2).
6
ENG
