®
Rev00_07_2017
10
•
Never make any modifications whatsoever to any component of any Fulcrum product.
•
Parts which have been bent or otherwise damaged in an accident or as a result of any other impact must not be re-straightened. They must be replaced immediately with
original Fulcrum parts.
• After using the wheel for the first time, check wheel trueness and circularity.
WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
• Do not expose the carbon wheels to high temperatures. Do not store bike parts in vehicles parked in the sun, and do not store near radiators or other heat sources. Do not
store carbon fiber products in direct sunlight.
When cleaning the wheels, only use non-aggressive, non-corrosive products such as water and neutral soap, or specific products specially designed for cleaning bicycles. Absolutely never
use abrasive or metal sponges. Dry with a soft cloth.
NOTE
Never spray your bicycle with water under pressure. Pressurized water, even from the nozzle of a small garden hose, can pass seals and enter into your Fulcrum components,
damaging them beyond repair. Wash your bicycle and Fulcrum components by wiping them down with water and neutral soap.
WARNING!
Salt water environments (as found on winter roads and near the seaside) can cause galvanic corrosion on most bike parts. Carefully rinse, clean, dry and
re-lubricate all exposed parts to avoid damage, malfunctions and accidents.
6.1 - CLEANING THE WHEELS
When transporting the wheel separately from the bike or if the wheel will not be used for a long period of time, store it in the wheelbag to protect it against impacts and dirt.
6.2 - TRANSPORT AND STORAGE
ENG
