WARNING!
Only use genuine Fulcrum spokes for your specific type and model of wheel. Failure to use correct spokes can result in an accident, personal injury or death.
To correctly assess wheel tension a tensiometer must be used: do not go by the tension you feel manually. It is therefore essential to have all the spoke replace-
ment operations carried out by a Fulcrum Store, a Fulcrum Service Centre or a mechanic specialised in assembly and maintenance on Fulcrum wheels. The spoke
part numbers can be found in the spare parts catalogue which is downloadable from our website www.fulcrumwheels.com.
WARNING!
RIM-TIRE COMPATIBILITY
Fulcrum
®
rims are very precise dimensionally. If a tire is too easy to install on a Fulcrum
®
rim, that tire is most likely too big and will not seat properly on the
rim. If a tire is too difficult to install, that tire is most likely too small. Use only high quality tires that require the use of tire levers and a reasonable installation
effort. Using talcum powder on the tire will make installation easier. Using a tire that does not fit properly on the rim can cause unexpected tire failure, resulting
in an accident, personal injury or death.
• The wheel you have purchased is designed to use clincher tires.
• Before mounting the clincher tyres, ensure that the diameter indicated on the clincher tyre is 622 mm and that the width of the clincher tyre is compatible with the width of the rim
based on the ETRTO rim/clincher tyre compatibility table (
"European Tyre and rim technical organisation standard manual - 2007" - pag. 4)
.
®
1 - TECHNICAL SPECIFICATIONS
1.1 - WHEEL TECHNICAL SPECIFICATIONS / SPOKES TECHNICAL SPECIFICATIONS
RIM:
700C (622x17C)
O.L.D:
front: 100 mm
rear: 130 mm
INFLATION PRESSURE:
see the inflation pressure recommended by the producer of the tire.
USE:
road racing on smooth road or track surfaces
only
.
2 - TIRES
ENG
3
