Fukuda FL-601 Series, Operational Manual

Page: 67 / 123

66
BASIC OPERATIONS
RS232C OPERATIONS
2. Out Data 2 (Detection Process (DET
、
MDET) data, test result transmission)
A differential pressure value (Pa value) is transmitted every 0.1 sec during the DET phase.
The test result data is transmitted during the EXH process, after the testing is complete.
(The format of the text transmitted for the test result is the same as with Out Data 1)
Format of transmitted text (Detection Process (DET, MDET) data)
Differential
Pressure Value
（
Pa
）
CR
6 １
Item
Byte No.
Data side +00000 0DH
3. Out Data 3 (Transmits data and test results from the beginning of the CHG1 phase through the
DET (MDET) phase.
A work pressure value (kPa value) is transmitted every 0.1 sec during the CHG1, CHG2, and BAL 1
processes,
and a differential pressure value (Pa value) is transmitted every 0.1 sec during the BAL2 and DET
(MDET) processes.
(The format of the text transmitted for the test result is the same as with Out Data 1)
Transmitted text format Transmitted text format
(Work Pressure value) (Differential Pressure value
）
Work Pressure
Value
（
kPa
）
CR
Differential Pressure
Value
（
Pa
）
CR
6 １ 6 １
Item
Byte No.
Data Ex.
+00.0
-
0DH
Item
Byte No.
Data Ex.
+00000 0DH
○
Test value transmission
The transmitted test value contents include all the setting items for the currently selected
group.(see page 51~53)
Transmitted text format
Delay(sec) CR Charge1(sec) CR Charge2(sec) CR Balance1(sec) CR
6 １ 6 1 6 1 6 １
Item
Byte No.
Data side
000.0s 0DH 000.0s 0DH 002.0s 0DH 001.0s 0DH
Balance2(sec) CR Detect(sec) CR Exhaust(sec) CR FDetect(sec) CR
6 １ 6 1 6 1 6 １
001.0s 0DH 002.0 0DH 001.0s 0DH 030.0s 0DH
WorkVolume(ml
)
CR Master
volume(ml)
CR +NG(ml/min) CR +2NG(ml/min) CR
7 1 12 1 6 1 6 １
1.000E2 0DH 1.000E2
-----
0DH +1.000 0DH +2.000 0DH
-NG(ml/min) CR +FNG(ml/min) CR -FNG(ml/min) CR UnitChange CR
6 1 6 1 6 1 6 1
-1.000 0DH +1.000 0DH -1.000 0DH ml
-
kPa 0DH
Lead.P(kPa) CR Test.P(kPa) CR Fitting Set CR Out Data CR
6 １ 6 １ 1 1 1 1
+000.
-
0DH +000.
-
0DH 0 0DH 0 0DH
Remote Stop CR UnitChange CR Cylinder CR
2 1 6 1 2 1
0
-
0DH ml
-
kPa 0DH 00
-
0DH
ETX Space CR
1 1 １
03H 20H 0DH
The transmission process is shown below.
1.
Press the MAINT key at the initial screen.
2. Input the password and press the ENT key. Select Data Load on page 2/2 using the key.
3. Press the ENT key.
4. Press the START key.