5
FOR YOUR SAFETY
■
DO NOT OPERATE UNDER INCOMPLETE SYSTEM CONDITIONS
・
Do not operate the tester unless under ideal working conditions. Factors such as lack of
workspace, incomplete piping or unsuitable conditions may cause the tester to spurt out a large
amount of compressed air, and could cause injuries and/or eye impairment that could lead to
blindness.
・
Do not open/close the ball valves on the rear panel while they are under pressure. It may cause
compressed air or residual pressure to spurt out unexpectedly when unclamping. It may also
cause possible injury or eye impairment that could lead to blindness.
■
LONG TERM SHUT DOWN
・
Be sure to turn off the main power source and to cut off the air source for safety.
●
MISCELLANEOUS
■
WHEN DAMAGED POWER CORDS, WIRING AND/OR PIPING ARE FOUND
・
When damaged power cords, wiring and/or piping are found, cut off the main power and
compressed air source immediately, and replace the damaged parts. Continued use of
damaged parts will cause fire, electric shock, and may rupture piping.
■
INTRUSION OF FOREIGN MATERIALS
・
If water, oil, or other foreign materials enter the tester, immediately cut off the main power
and the compressed air source. Continued operation of damaged testers can cause fire, or
possible electric shock. Contact your local FUKUDA distributor for technical advice.
■
DROPPED OR DAMAGED TESTERS
・
When a tester is dropped, inadvertently falls, or breaks, cut off the main power and compressed
air source immediately. Continued operation of damaged testers can cause fire or possible
electric shock. For repair, contact your local FUKUDA distributor.
■
CONTINUED USE OF DAMAGED TESTERS WILL…
・
Continued use of damaged testers will cause irregular conditions such as smoke discharge, other
odd smells, or unusual sounds, and may lead to fire or electrical shock. Immediately cut off the
main power and compressed air sources, and make sure that it is no longer smoking. (Make
sure that it does not start a fire. If necessary, notify people nearby about this potential danger).
For maintenance and repair, contact your local FUKUDA distributor.
WARNING
Summary of Contents for FL-601 Series
