Fujitsu TeamPoS 3600 Series, Installation & Maintenance Manual

Page: 21 / 165

Team PoS 3600 Series
Site Preparation
D900000338 Issue 3 4-1
Chapter 4. Site Preparation
This chapter defines the pre-installation details for the
Team
PoS
3600 Series:
•
Shipment inspection and return
•
Anti-static protection
•
Electrical supply requirements
•
Main power cables
•
Warning labels
•
The procedures assume that in-store wiring for the terminals, its peripherals, and
terminal-to-terminal communications have been installed.
4.1 Unpacking/ Inspecting the Shipment
Team PoS 3600 Series
terminals are thoroughly inspected prior to shipment; however,
damage can occur during transit. Any damage to the terminal can lead to problems after
installation. Before accepting a shipment, inspect all shipping containers for external
damage. Ensure that all packages listed on the shipment billing form have been delivered.
•
Verify that all the accessories listed on the packing list have been included in the
shipment.
If components are missing, contact your Help Desk for instructions. Then
report shortages and damages to Customer Care. The customer needs to provide the
sales order number and a description of the piece of equipment damaged. To contact
Customer care call 1-800-780-5525 and a Customer Care representative will arrange
for replacement. Customer Care is not responsible for equipment damaged by the
customer after it is delivered. If the equipment is damaged during shipment then the
liability falls upon the shipper.
•
Inspect the exterior of each shipping box noting damage on the shipping documents so
that the carrier has a record.
Remove the unit and components from the box and check
for damage. If the unit or components are damaged, contact your Help Desk for
instructions.
•
Inspect the exterior of each unit for any obvious physical damage (scratches or
abrasions on painted or display surfaces, or on plastic surfaces) that could have
occurred during shipping.
•
Damaged equipment received from a source other than Fujitsu Foothill Ranch facility
should be reported to the sender.
Note: The procedures in this chapter are intended for authorized service
personnel only.