Fujitsu TeamPoS 3600 Series, Installation & Maintenance Manual

Page: 152 / 165

Team PoS 3600 Series
BIOS
D900000338 Issue 3 9-34
9.2.1 Upgrading with Type 1 BIOS
These instructions are provided for the upgrade of the
TeamPoS 3600 Series (Yukon) BIOS to Rxx
type 1 BIOS update
‟
(xx is the BIOS revision number, R20 would be revision 20) This update only
updates the system BIOS area, and does not update any other areas such as the Intel ME BIOS.
•
Loading the Rxx BIOS
1. Copy the folder “ Rxx
‟
(xx is the BIOS revision number, R20 would be revision
20) on to a bootable USB drive
2. Boot to USB drive and go to the “ Rxx
‟
folder
3. Type "
awdflash yunm1rxx.bin /py /sn /r
" and hit “
Enter
‟
4. After BIOS is done flashing, the system will reboot
9.2.2 Upgrading with Type 2 BIOS
Low Level (Type 2) BIOS Update on TP3600 Series: BIOS updates on the TP3600 Series will
come in 2 different types: Type 1 and Type 2. A Type 1 BIOS update is a standard BIOS firmware
update. A Type 2 BIOS update may have updates for one or all of the following components: Intel
ME (includes AMT, ASF, QST), GbE and standard BIOS.
Items needed:
•
1 (one) 2.54 mm (0.1 inch) jumper
•
The cover for the controller will need to be removed to access the motherboard
Note : The instructions below call for a use of a jumper across CN5. If a spare
jumper cannot be found, the jumper that is across CN3 can be taken and used for
CN5. The instructions were written so that only a single jumper will be needed.
case.
To save current DMI information of current system to be restored after BIOS is updated:
1. Navigate to the Yukon support folder at ftp://ftp.ftxs.fujitsu.com/pos/possustaining/retail
and go into the BIOS update tools directory. Copy the contents onto a bootable USB drive
(DMI Tool, RXX BIOS [YUNM2RXX.bin], and BIOS update programs)
*** The contents of DMI Tool and RXX should all reside in the same directory ***
2. Boot to bootable USB Drive and navigate to the directory where the files are located
3. Type "rinfo" and hit Enter
*** This should save the DMI contents onto the flash drive ***
4. Copy info on flash drive for later verification