Fujitsu TeamPoS 3600 Series, Installation & Maintenance Manual, Page: 159 / 165

Team PoS 3600 Series
BIOS
D900000338 Issue 3 9-41
9.3 Clear CMOS
The Clear CMOS jumper is located next to the connector going to the HDD converter
board.
The label on the jumper is CN3 and is shown below in its normal operational state. In order
to clear CMOS the following procedure needs to be followed:
1. Power must be turned off and the AC plug removed.
2. Move jumper CN3 from 1-2 to the 2-3 position.
3. Move jumper back to position 1-2
4. Plug in the AC power cord and power up the terminal, this will clear CMOS
Move jumper
CN3 from 1-2
to the 2-3
position.