Fujitsu TeamPoS 3600 Series, Installation & Maintenance Manual

Page: 114 / 165

Team PoS 3600 Series
Troubleshooting
D900000338 Issue 3 8-1
Chapter 8. Troubleshooting
8.1 Power Cannot Be Turned On
Power cannot be turned on or the unit powers off after a few minutes. The power LED next to the
power switch does not light up.
End End
Power Cannot Be
Turned On
Is the power cable
connected?
Is there power to the AC
outlet?
(Test with device known to
work.)
Yes
No
Does the power shut off
after a few minutes?
Turn on power to the
distribution panel.
No
Yes
Go into the CMOS setup by hitting
“delete” during boot up and “Load
Optimized Defaults”. Does the power stay
on?
Is the cable from the
operation panel to the
HDD securely installed?
Yes
No
No
Can the power be
turned on after
replacing the power
supply unit?
Yes
Can the power be
turned on after
replacing the
motherboard?
Verify functionality after securely
installing the cable.
No
Yes
Yes
No
Can the power be
turned on after
replacing the I/O
boards?
No
End
Yes
Replace the controller
No
End
Yes
Connect the power
cable.
Note: The procedures in this chapter are intended for authorized service
personnel only.