RX220
Operating Manual
49
Preparation for Use and Operation
Switching the Server ON and OFF
Switching the server ON
The power-on indicator (position 11 in
figure 9 on page 43
) lights amber.
–
First system installation:
Ê
Press the ON/OFF button (position 9 in
figure 9 on page 43
).
The power-on indicator lights green.
Ê
Insert the
ServerStart
-CD and/or an installation disk into the corre-
sponding drive.
Ê
Follow the instructions on the monitor (see also
“Configuring the Server
and Installing the Operating System” on page 51
).
–
System already installed:
Ê
Press the ON/OFF button (position 9 in
figure 9 on page 43
).
The server is switched on, performs a system test and boots the
operating system.
Switching the server OFF (ACPI-compatible operating systems, e.g.
Windows 2000, Linux)
The power-on indicator (position 11 in
figure 9 on page 43
) lights green.
Ê
Shut down the operating system in an orderly manner.
The server is switched OFF automatically.
The power-on indicator lights amber.
Switching the server OFF (non-ACPI-compatible operating systems)
The power-on indicator (position 11 in
figure 9 on page 43
) lights green.
Ê
Shut down the operating system in an orderly manner.
The server remains ON and the power-on indicator stays green.
Ê
Press the ON/OFF button (position 9 in
figure 9 on page 43
) or send a corre-
sponding control signal (see
“Other ON/OFF options” on page 50
).
The server switches OFF.
The power-on indicator lights amber.