RX220
Operating Manual
39
Hardware Installation
Connecting Devices to the Server
4.4
Connecting Devices to the Server
The ports for external devices are on the rear of the server. You find an
additional USB port on the front of the server. Which additional ports are
available on your server depends on the PCI boards installed.
The standard ports (
figure 8
) are marked with symbols, and some are color-
coded:
Figure 8: Connections
V
CAUTION!
The connectors on the system board are SMD-mounted and may break
easily if under strain. Therefore, install the cables in such a way as to put
as little strain on the connectors as possible. This applies especially to
the VGA cable (5).
I
Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê
Connect the desired devices to the server.
1 Mouse (PS/2) (green)
5
Monitor port (VGA) (blue)
2 Keyboard port (PS/2) (purple)
6
LAN 2 (10/100/1000 MBps)
3 Top: USB 1
7
LAN 1 (10/100/1000 MBps)
Bottom: USB 2
8
Mains connection
4 Serial port COM1
8
7
6
5
4
3
2
1