3 Converting the server and installing to the rack
47
E
2
Unite the slide rails to the rail brackets.
Unite the rail bracket and the slide
rail by using two M4 flathead screws
after the slide rail is extended to the
position in which a screw hole
forward is seen.
3
Attach the slide rails to the rack.
Attach the rear side first. fix by inserting the
ledge part of the rail bracket in the 2nd hole, and
using the M5 flathead screws and washers at the
1st and 3rd hole.
And then, fix the front side in the same way.
M4 flathead
screws
Slide rail
Rail bracket
Extend the rail until the screw hole
comes to be seen at this position.
The last screw hole
The third
screw hole
"Rear side"
"Front side"
Washer
M5 flathead screw
Ledge part
