38
Removal procedure
1
Turn the drive cover key counterclockwise to unlock the cover.
2
Slide the drive cover upwards and remove the hard disk cover.
Tilt the hard disk cover toward you and pull it up to
remove.
3
Touch the metal chassis to discharge static electricity.
4
Remove the hard disk units.
Pressing the release button on the hard disk
unit, raise the handle upward to release the
lock and pull out to remove. Hold the hard
disk unit with both your hands and pull it out.
`
It is not necessary to remove dummy units
for 3.5-inch storage bays. The server can be
converted to a rackmount type with the bays
attached.
`
The drive cover key is unique to each device. Be
careful not to lose this key.
If you lose the drive cover key, contact an office
listed in the "Contact Information” section of the
“Start Guide”.
Drive cover key
Handle