46
3.5
Installing the server in the rack
This server requires 4U of cabinet space for a rackmount. Decide the server's position (height) in the
rack cabinet before starting installation.
Choosing the server's position (height) in the rack cabinet
1
Open the front and rear doors of the rack cabinet.
2
Place the server in the rack.
Choose the height at which - to place the server in the
rack by aligning the base of the server with one of the
narrower spaces - in the rack bracket.
Attaching the slide rails
1
Attach M5 rack nuts to the rack.
Use 5U per device. Insert the latches of the
rack nuts from the inside of the rack
bracket into 2nd and 14th holes (counting
from the position where the server is
installed) to attach the rack nuts.
[Rack bracket]
The base of the server
The base of the server
[Front of rack bracket]
5U (height of the server)
14th hole
(M5 rack nut)
2nd hole
(M5 rack nut)
