Fujitsu PRIMERGY CX400 S1, Upgrade And Maintenance Manual

Page: 161 / 210

CX400 S1
Upgrade and Maintenance Manual 161
Linking boards
10.1.2.1 Required tools
●
Preliminary and concluding steps:
– Phillips PH2 / (+) No. 2 screw driver
●
Main steps:
– Phillips PH2 / (+) No. 2 screw driver
10.1.2.2 Preliminary steps
Perform the following procedures:
Ê
"Shutting down the server node" on page 41
Ê
"Removing the server enclosure out of the rack" on page 43
V
CAUTION!
For ALL service tasks, remove the CX400 S1 server enclosure out of
the rack and put it on a separate desk!
It is not allowed to draw the CX400 S1server enclosure partially out
of the rack.
Ê
"Removing the server node from the server enclosure" on page 48
Ê
"Opening the server enclosure" on page 51
Ê
"Removing the power supply module" on page 84
Ê
Remove both fan modules as described in section "Removing the fan
module" on page 137 .
Ê
"Removing the power distribution module" on page 54
Ê
"Removing the midplane" on page 153
10.1.2.3 Removing the linking board
I
Take note of the linking board position!