Fujitsu PRIMERGY CX400 S1, Upgrade And Maintenance Manual

Page: 50 / 210

50 Upgrade and Maintenance Manual
CX400 S1
Basic hardware procedures
4.5 Removing the server node dummy module
I
The CX400 S1 system must always run with closed node bays. It is only
allowed to leave a bay open for a limited time in case of repairing a server
node (for example). In this case the node bay must be closed within one
hour. In the meantime all remaining server nodes run in throttling mode
(with reduced performance).
V
CAUTION!
●
Follow the safety instructions in the chapter "Important information"
on page 31 .
Figure 9: Removing the server node dummy module
Ê
Undo the locking mechanism (1) of the release lever and pull the server
node dummy module out of the slot (2).