Fujitsu PRIMERGY CX272 S1, Upgrade And Maintenance Manual

Page: 83 / 234

CX272 S1
Upgrade and Maintenance Manual 83
Basic software procedures
I
For detailed information on BMC settings, refer to the "Integrated
Remote Management Controller" user guides available online at
http://manuals.ts.fujitsu.com or from the ServerView Suite DVD 2 supplied
with your PRIMERGY server.
5.2.4 Enabling replaced components in the system BIOS
When a processor, an expansion card, or a memory module fails, the defective
component will be set to
Disabled or Failed . The server will then reboot with only
the intact hardware components remaining in the system configuration. After
replacing the defective component, it needs to be re-enabled in the system
board BIOS.
Ê
Enter the BIOS.
Ê
Select the
Advanced
menu.
Ê
Select the status menu of the desired component:
– Processors: CPU Status
I
This option is only available for multi-processor systems.
– Memory: Memory Status
Ê
Reset replaced components to Enable .
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D3306 BIOS Setup Utility" reference manual.
5.2.5 Verifying the memory mode
If a memory module fails, the server will reboot and the defective module will be
disabled. As a result, the current operation mode (e.g. Mirrored Channel mode)
may no longer be available due to a lack of identical memory module pairs. In
this case, the operation mode will automatically revert to Independent Channel
Mode.
I
For detailed information on memory operation modes available for your
server, refer to section
"Operation modes" on page 145 .