Fujitsu PRIMERGY CX272 S1, Upgrade And Maintenance Manual

Page: 152 / 234

152 Upgrade and Maintenance Manual
CX272 S1
Main memory
7.3.2 Removing a memory module
Figure 83: Removing memory modules
Ê
Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector (1).
Ê
Remove the ejected memory module (2).
Figure 84: Removing memory modules (B)
7.3.3 Concluding step
Perform the following steps:
Ê
"Installing the memory slot air ducts" on page 45
Ê
"Installing the air duct brackets" on page 47
Ê
"Installing the air duct" on page 49
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
If applicable, reconnect all external cables.
Ê
"Switching on the server node" on page 73
Ê
"Updating or recovering the system board BIOS and BMC" on page 77 (if
applicable)