Fujitsu PRIMERGY CX272 S1, Upgrade And Maintenance Manual, Page: 198 / 234

198 Upgrade and Maintenance Manual
CX272 S1
System board and components
9.2.3.4 Concluding steps
Perform the following procedures:
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
If applicable, reconnect all external cables.
Ê
"Switching on the server node" on page 73
Ê
"Enabling boot watchdog functionality" on page 84
9.2.3.5 Software configuration
The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê
Switch on the server.
Ê
Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê
The server should now boot from the "Recovery Tool CD".
Ê
Follow the on-screen instructions.