Fujitsu PRIMERGY CX272 S1, Upgrade And Maintenance Manual, Page: 111 / 234

CX272 S1
Upgrade and Maintenance Manual 111
Expansion cards
6.2.2.3 Replacing SFP+ transceiver modules
Removing SFP+ transceiver modules
Ê
Remove the defective SFP+ transceiver module(s) as described in section
"Removing an SFP+ transceiver module" on page 108 .
Installing SFP+ transceiver modules
Ê
Unpack the new SFP+ transceiver module.
Ê
Verify that the new SFP+ transceiver module is the same type of transceiver
you are replacing.
Ê
Install the new SFP+ transceiver module(s) as described in section
"Installing SFP+ transceiver modules" on page 103 .
Ê
Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
"Looking up changed MAC / WWN addresses"
on page 90 .
I
By replacing SFP+ transceiver modules, WWN (World Wide Name)
and MAC (Media Access Control) addresses will change.
Upgrade and Repair Unit
(URU) Hardware: 5 minutes
Tools: tool-less