Fujitsu PRIMERGY CX272 S1, Upgrade And Maintenance Manual

Page: 219 / 234

CX272 S1
Upgrade and Maintenance Manual 219
System board and components
9.3.3 Concluding steps
Perform the following steps:
Ê
"Installing the riser module" on page 70 with expansion all cards (if
applicable)
I
Install the expansion cards into their original slots.
Ê
"Installing the memory slot air ducts" on page 45
Ê
"Installing the air duct brackets" on page 47
Ê
"Installing the air duct" on page 49
Ê
"Installing the air duct" on page 49
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
If applicable, reconnect all external cables.
Ê
"Switching on the server node" on page 73
Ê
"Updating or recovering the system board BIOS and BMC" on page 77 (if
applicable)
Ê
"Verifying the system time settings" on page 86 .
Ê
Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
"Looking up changed MAC / WWN addresses"
on page 90 .
Ê
After replacing the system board in a server running Linux OS, update the
MAC address of the onboard network controller in the related NIC definition
file as described in section
"Updating the NIC configuration file in a Linux
environment" on page 88 .
Ê
"Enabling boot watchdog functionality" on page 84
Ê
If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 92 .