Fujitsu PRIMERGY CX2550 M1, Upgrade And Maintenance Manual

Page: 84 / 222

84 Upgrade and Maintenance Manual
CX2550 M1
Basic software procedures
Using the iRMC web frontend
Ê
Enter the ServerView iRMC web frontend.
Ê
Under System Overview , click Identify LED Off to switch off the ID indicators.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch off the ID indicator.
5.2.18 Performing a fan test
I
Notes on replacing a defective fan
After replacing a defective system fan or power supply unit containing a
defective fan, the fan error indicators will stay lit until the next fan test. By
default, a fan test is automatically started every 24 hours. The first
automatic fan test being performed after replacing a fan will turn off the
fan error indicator.
If you want to start the fan test manually, you can do so by following the
description below:
Executing the fan test via the iRMC Web interface
Ê
Log into the iRMC web interface.
Ê
Under Sensors select Fans .
Ê
Select the replaced fan in the system fans group and click Start Fan Test .
I
For detailed information on iRMC settings, refer to the "Integrated
Remote Management Controller" user guide.
Executing the fan test via ServerView Operations Manager
Ê
Open the ServerView Operations Manager and log in.
Ê
Under Administration select Server Configuration .
Ê
In the hierarchy tree of the Server list tab, select the server to be configured.
Ê
In the right-hand side of the window, specify the details on the selected
server and confirm your entries by clicking
GO... .