Fujitsu PRIMEPOWER 800, User Manual

Page: 104 / 145

76 C120-E093-04EN
CHAPTER 9 System Management Console (SMC)
*) The PRIMEPOWER100 is not used by Fujitsu Siemens Computers. Fujitsu Siemens
Computers uses the PRIMESTATION instead. See the assigned system administrator’s guide
"PRIMESTATION as LAN Console or SMC".
(Note: The PRIMEPOWER100N, which is distributed by Fujitsu Siemens Computers, is not
identical with the Fujitsu model PRIMEPOWER100.)
(2) SMC hardware requirements (in Japan)
Use the following platform in Japan. The PCI cards allocation must not be changed.
Table 9.2 SMC Hardware Requirements (In Japan)
Item
Specification
GP7000F SMC
PRIMEPOWER SMC
PRIMEPOWER100
Platform CPU UltraSPARC-IIi 360 MHz UltraSPARC-IIe 500 MHz
Memory 128M Bytes 256M Bytes
Hard Disk 8.4G Bytes 18G Bytes
CD-ROM CD-ROM drive
standard loading
DVD-ROM drive
standard loading
Display Resolution 1152 × 900
Connector
dimensional standard
D-sub 15 pin
Standard onboard PCI cards One Fast/Wide Ultra-SCSI/
FastEthernet card
One FastEthernet card
One PGX32 Color Frame
Buffer card
One Quad FastEthernet
cards
Tape station External DAT drive
(DDS-3 standard-compliant)
Internal DAT drive
(DDS-3 standard-compliant)