Fujitsu PRIMEPOWER 800, User Manual

Page: 67 / 145

C120-E093-04EN 39
5.1 Overview of Main Unit Operator Panel
5.1.4 Forced Termination of the Partition Processing
The SMC that is connected to the main unit can forcibly terminate the processing of the main
unit if abnormal processing occurs, such as when a partition hangs.
The procedure for forced termination from the SMC is listed below.
1
From the Machine Administration menu, select "Server selection."
2
From the Server Selection menu, select the server whose information you want
to be displayed.
3
The Server Processing menu of the selected server is displayed.
4
From the Server Processing menu, select "System Power Administration."
5
From the System Power Administration menu, select the corresponding
operation item.
Settings made by these operations are valid irrespective of the status of the mode switch on the
operator panel.
•
Partition dump switch instruction
This instruction stops the running partition and collects a data dump.
After the dump is written to disk, the partition is reset, and the operating system is restarted.
•
Partition reset instruction
This instruction resets the running partition.
Use this instruction only if the partition dump switch instruction is disabled or if any other
error has occurred in the operating system of the partition.
•
Forcible partition termination instruction
This instruction forcibly turns off the power to the running partition.
Use this instruction only if the processing of the partition cannot be normally stopped or if
another hardware error has occurred.
Data destruction
Never perform the following operations if the partition is running normally: