Fujitsu PRIMEPOWER 800, User Manual

Page: 74 / 145

46 C120-E093-04EN
CHAPTER 5 Main Unit Operator Panel Operation
5.3.2 Messages Regarding the System Control Facility
Figure 5.5 shows the operator panel status and Table 5.6 lists the messages displayed on the
operator panel while the System Control Facility symbol is selected (the cursor points to C). It
takes a while to display the next message after the first message is displayed.
Figure 5.5 Messages Regarding the System Control Facility
Table 5.6 Messages Regarding the System Control Facility
Symbol Displayed data Contents Details on message
C Power ON Ready Power-on preparation is
completed.
Indicates that the initialization for
overall system control is finished.
Power on in this state is available.
Warm up... Waiting for warm up to
complete.
Indicates that the system is
warming up.
Ext. Powup... Waiting for air condition
adjustment.
Indicates that the main unit is
waiting until the air conditioning
facility that is connected to the RCI
network turns on
(if applicable).
Cooling... Postpones terminating process
of cooling down.
Indicates that the cooling time for
the system has been extended, and
is waiting while the system cools
down.
SCF Initialize 1... SCF initializing phase1. Indicates that the system is loading
system information from the
operator panel.
SCF Initialize 2... SCF initializing phase2. Indicates the system is
synchronizing with each cabinets.
1XXX SYSTEM PON Power-on issuing phase. XXX: Phase code
2XXX XB INITIAL Initializing Crossbar board. XXX: Phase code
5XXX SB INITIAL Initializing System Board. XXX: Phase code
6XXX SB START System Board activated. XXX: Phase code
7XXX SB START Proceeding the System Board
power-on diagnosis.
XXX: Phase code
PRIMEPOWER1000
or PRIMEPOWER800
Power-on is completed. Displays the model name.
Power OFF... Shutting down.
RCI:3001 VER:01 RCI IO Node service pin
message.
RCI: RCI address
VER: RCI node version
!
"##$# $%&$ '( #') &'* + %*%'
,# -#%'%&