Fujitsu PRIMEPOWER 800, User Manual

Page: 103 / 145

C120-E093-04EN 75
CHAPTER 9 System Management
Console (SMC)
9
This chapter describes the System Management Console (SMC):
l
SMC Hardware Requirements
l
Power on/off the SMC
l
Creating Backups
9.1 SMC Hardware Requirements
This section describes the SMC hardware requirements.
Hardware requirements may change depending on the platform and hardware component
release. For current information, contact the sales representatives or a certified service engineer.
(1) SMC hardware requirements (outside of Japan)
To use the SMC for the main unit, the following hardware must be installed.
For details on the PCI cards allocation, see the "System Console Software Release Note."
Table 9.1 SMC Hardware Requirements (Outside of Japan)
Item
Specification
Platform
PRIMEPOWER200
(Pedestal)
PRIMEPOWER100(*)
CPU SPARC64 GP
250 MHz or faster
UltraSPARC-IIe
500MHz or faster
Memory 256M Bytes or more 256M Bytes or more
Hard Disk 9.1G Bytes or more 18G Bytes or more
Display Resolution 1152 × 900 or 1280 × 1024
Connector
dimensional standard
D-sub15pin or 13W3
Recommended PCI card One PGX32 Color Frame
Buffer card 1 to 3
FastEthernet card(s)
One PGX32 and One Quad
Fast Ethernet card
CD-ROM CD-ROM drive
standard loading
DVD-ROM drive
standard loading
Tape station Internal DAT device (DDS-3 standard)
Keyboard Solaris compatible