Fujitsu PRIMEHPC FX1000, Operating Manual

Page: 91 / 97

[ERR.] xos RAS 0005 - internal information ioremap failed for GICv3_GICD.
Meaning
Memory mapping to the GICv3 Distributor (GICD) area failed.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0006 - internal information ioremap failed for GICv3_ITS_CNTL_REG.
Meaning
Memory mapping to the GICv3 Distributor (ITS) area failed.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0007 - internal information register_ras_handler failed, since the handler has
already been registered.
Meaning
The RAS handler is already registered. Alternatively, registration of the RAS handler failed.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0008 - internal information ITS HOST SOFTWARE ERROR detected. GITS_FJ_
ITS_ERROR_STATUS=DATA1
Meaning
HOST SOFTWARE ERROR was detected in the ITS setting trigger.
DATA1
: ITS error status register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0009 - internal information ICC HOST SOFTWARE ERROR detected. GICD_FJ_
ICC_ERROR_STATUS=DATA1
Meaning
HOST SOFTWARE ERROR was detected in the ICC setting trigger.
DATA1
: ICC error status register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0010 - internal information ICH ICV GUEST SOFTWARE ERROR detected.
GICD_FJ_ICH_ICV_ERROR_STATUS=DATA1
Meaning
GUEST SOFTWARE ERROR was detected in the ICH or ICV setting initiator.
DATA1 : ICH_ICV error status register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
Appendix B CPU-MEM-RAS Driver Messages
C120-0089-03EN 73