Fujitsu PRIMEHPC FX1000, Operating Manual

Page: 70 / 97

Checking the Configuration
To check the configuration, select [FRU Information] from the [Server Status] menu. For details, see "3.1
Server Status" in the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's Guide (C120-0091EN).
Powering Off
To power off, control the power from [Power Control] in the [Power Control] menu. For details, see "3.3
Power Control" in the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's Guide (C120-0091EN).
Checking the Error Log
To check the error log, select the [System Event Logs] menu. For details, see "3.2 System Event Logs" in
the FUJITSU Supercomputer PRIMEHPC FX700 BMC User's Guide (C120-0091EN).
3.17 Installing the OS
This section describes the procedures for installing the OS and OS drivers.
3.17.1 OS Installation Procedure
The following is the procedure for installing the OS.
Install the supported OS and apply the supported kernel.
For details on the supported OS and kernel, see the following sites:
For the Japanese market
https://www.fujitsu.com/jp/products/computing/servers/supercomputer/downloads/
For the global market
https://www.fujitsu.com/global/products/computing/servers/supercomputer/documents/
To install the OS, perform the following two procedures in the order shown:
- Creating an Installation DVD
- Installing the OS From the Network
Creating an Installation DVD
The following is the procedure for creating an installation DVD.
Download the ISO (image) from RHN (Red Hat Network) to create an installation DVD.
1.
Log in to RHN.
To sign up for RHN, see "Understand the Red Hat subscription model" from Red Hat, Inc.
2. Open the ISO image publishing page.
3. Select the distribution you want to install.
4. Download the Binary Disc ISO image.
The RHN screen displays the MD5 checksum. Confirm that the checksum of the downloaded ISO
image is correct.
5. Create an installation DVD from the ISO image.
Chapter 3 Starting Up
C120-0089-03EN
3.17 Installing the OS
52