Fujitsu PRIMEHPC FX1000, Operating Manual

Page: 95 / 97

Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0026 - internal information A pending error was not detected even though an
interrupt was received. GICD_FJ_GIC_HOST_SOFTWARE_ERROR_PENDING=DATA1
Meaning
No pending error was detected even though an interrupt was received.
DATA1 : Error pending register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0027 - internal information HOST SOFTWARE ERROR detected. GICD_FJ_GIC_
HOST_SOFTWARE_ERROR_PENDING=DATA1
Meaning
HOST SOFTWARE ERROR was detected.
DATA1 : Error pending register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0028 - internal information Invalid error code or type detected when memory
abort occurred. esr=DATA1 ERR0STATUS=DATA2
Meaning
A memory abort occurred.
The error code or error type is invalid.
DATA1
: ESR register value
DATA2 : Error status register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0029 - internal information Failed to detect the error. [DATA1]
Meaning
Error detection failed.
DATA1 : Function name that failed error detection
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0030 - internal information Failed to hook the function. [DATA1] (ret=DATA2)
Meaning
Hook of the error detection function failed.
DATA1 : Function name to hook
DATA2
: Hook function return value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
Appendix B CPU-MEM-RAS Driver Messages
C120-0089-03EN 77