Fujitsu PRIMEHPC FX1000, Operating Manual

Page: 92 / 97

[ERR.] xos RAS 0011 - internal information Uncorrectable Error RAW L1 detected.
Meaning
A raw UE detected on the L1 cache was not error-marked.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0012 - internal information Uncorrectable Error RAW L2 detected.
Meaning
A raw UE detected on the L2 cache was not error-marked.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0013 - internal information Clearing ERR0STATUS.UE failed. ERR0STATUS=DATA1
-> DATA2
Meaning
Clearing of an uncorrected error bit failed in the error status register.
DATA1 : Error status register value before clearing
DATA2
: Error status register value after clearing
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0014 - internal information Clearing valid bit failed. ERR0STATUS=DATA1 ->
DATA2 -> DATA3
Meaning
Clearing of a valid bit failed in the error status register.
DATA1 : Error status register value before clearing
DATA2 : Error status register value after clearing an uncorrected error bit
DATA3
: Error status register value after clearing a valid bit
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0015 - internal information Assertion failure detected. esr=DATA1
ERR0STATUS=DATA2
Meaning
An error was detected in a data path system (arithmetic unit, etc.) in the core.
DATA1 : ESR register value
DATA2 : Error status register value
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0016 - internal information Internal data path detected. esr=DATA1
ERR0STATUS=DATA2
Meaning
Appendix B CPU-MEM-RAS Driver Messages
C120-0089-03EN 74