Fujitsu PRIMEHPC FX1000, Operating Manual, Page: 84 / 97

[ERR.] xos BMC 0005 - internal information Detected an internal error of the IPMI command.
[CODE]
Meaning
The command cannot be executed due to an internal error.
CODE : IPMI command code
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos BMC 0006 - internal information Detected hard error. [CODE]
Meaning
A hardware error response was received from the BMC.
CODE : IPMI command code
Action
There is a suspected hardware failure. Collect investigation data according to " 5.3.1 Collecting
Information for Maintenance Purposes " and then contact Fujitsu Support with the collected data together
with the output message.
[ERR.] xos BMC 0007 - internal information BMC could not allocate enough memory requested.
[CODE]
Meaning
A response was received from the BMC about not being able to secure an area of the requested size.
CODE : IPMI command code
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos BMC 0008 - internal information Failed to create a log file for developers.
Meaning
Generation of a log file for developers failed, and BMC driver initialization failed.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes " and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos BMC 0009 - internal information Failed to create a log file for IPMI messages.
Meaning
Generation of an IPMI message log file failed, and BMC driver initialization failed.
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes ," and then
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos BMC 0010 - internal information Command time out. [CODE]
Meaning
A timeout occurred while waiting for the completion of an issued command.
CODE
: IPMI command code
Action
Collect investigation data according to " 5.3.1 Collecting Information for Maintenance Purposes " and then
contact Fujitsu Support with the collected data together with the output message.
Appendix A BMC Driver Messages
C120-0089-03EN 66