Fujitsu Oracle M10-1, Service Manual

Page: 68 / 254

XSCF>
showdomainstatus -p 0
Logical Domain Name Status
primary Solaris powering down
XSCF>
dumpconfig -v -V file:///media/usb_msd/backup-file.txt
primary#
svccfg -s ldmd listprop ldmd/recovery_mode
5.
Execute the showdomainstatus command to confirm the operating condition
of the logical domain.
In the following example, [Status] of the logical domain displays "Solaris
powering down," indicating the power-off processing of Oracle Solaris.
5.6 Saving Setting Information and
Configuration Information
5.6.1 Saving XSCF setting information
This section describes how to save the following XSCF setting information:
■
Network configuration information, advanced setting information, guest domain
configuration information, etc.
■
CPU Activation key, CPU Activation assignment, etc.
■
PPAR operation mode, time zone setting, user information, etc.
The following example shows the command for saving the XSCF setting information
on the USB device. For details, see "10.10 Saving/Restoring XSCF Settings
Information" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation
and Administration Guide .
5.6.2 Setting recovery mode
Perform the following procedure to enable recovery mode in a control domain.
1. Log in to Oracle Solaris on the control domain.
2. Use the svccfg command to confirm that recovery mode is enabled.
If recovery mode is enabled, the command displays the following.
Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021 54