Fujitsu Oracle M10-1, Service Manual

Page: 239 / 254

Chassis Serial Number
---------------------
TZ01348016
#
Table C-3 prtconf command options
Option Description Application
No options Displays the device tree for the
devices recognized by Oracle Solaris.
A hardware device is regarded as
operating normally if it is
recognized. If the message "(driver
not attached)" is displayed for a
device or a sub-device, the driver
for the device is corrupted or does
not exist.
-D Outputs content similar to that of
no options but differs in that the
displayed content contains device
driver names.
Allows you to check the driver
necessary for Oracle Solaris to
enable the device, or to view a list
of drivers to be used.
-p Outputs content similar to that of
no options but differs in that the
display is simpler.
Allows you to view the devices as a
simple list.
-V Displays the version and date of the
OpenBoot PROM firmware.
Allows you to quickly check the
firmware version.
#
prtconf
System Configuration: Oracle Corporation sun4v
Memory size: 131304 Megabytes
System Peripherals (Software Nodes):
ORCL,SPARC64-X
scsi_vhci, instance #0
packages (driver not attached)
SUNW,builtin-drivers (driver not attached)
C.3 prtconf Command
The prtconf command displays the configured devices.
The prtconf command identifies hardware units recognized by Oracle Solaris.
When a software application experiences a hardware-related issue even though there
is no hardware error, this command allows you to check whether Oracle Solaris
recognizes the hardware and whether the hardware drivers are loaded.
Table C-3 lists the options of the prtconf command and how those options are useful
for troubleshooting.
The following example shows the output from the prtconf command.
Appendix C Oracle Solaris Troubleshooting Commands 225