Fujitsu Oracle M10-1, Service Manual

Page: 33 / 254

Table 2-6
System operation status indicated by LEDs
Icon Name Color State Description
POWER Green On System is started.
Blinking System is being stopped.
Off System is stopped.
XSCF
STANDBY
Green On The XSCF is functioning normally.
Blinking The XSCF is being initialized.
Off The XSCF is stopped.
CHECK Amber On Hardware has detected an error.
Blinking Chassis specified at execution of the XSCF
command instructing the blinking. This
(locator) is used to identify the location of the
chassis requiring maintenance.
Off Normal state, or the power is disconnected or
otherwise not being supplied.
Table 2-7
System status indicated by combination of LEDs
LED state Description
POWER XSCF
STANDBY
CHECK
Off Off Off Power is disconnected.
Off Off On The XSCF has detected an error before system
start or after system stop.
Off Blinking Off The XSCF is being initialized.
Off On Off The XSCF is in the standby state.
The system is waiting for power-on of the air
conditioning facilities (in the data center).
On On Off Warm-up standby processing is in progress. After
the end of this processing, the system starts up.
System startup processing is in progress.
The system is operating.
On On On Although the system is operating normally, an
error has been detected.
Blinking On Off System stop processing is in progress. After the
end of processing, the fan unit stops.
combination of being on, blinking, or off. For the locations of the LEDs, see Figure
2-8 .
Table 2-6 lists the system operation status indicated by the LEDs, while Table 2-7 lists
the system status indicated by the combination of LEDs.
Chapter 2 Understanding the System Components 19