Fujitsu Oracle M10-1, Service Manual

Page: 34 / 254

A
Table 2-8
Status of the system locator
Icon Name Color State Description
CHECK Amber On Hardware has detected an error.
Blinking Chassis specified at execution of the XSCF
command instructing the blinking. This
(locator) is used to identify the location of the
chassis requiring maintenance.
Off The system is in the normal state, or the
power is disconnected or otherwise not being
supplied.
2.4.2 LEDs on the rear panel (System locator)
The field engineer or system administrator can identify the chassis requiring
maintenance by noting the CHECK LED (A in Figure 2-10 ) on the rear panel. The
CHECK LED on the rear panel is referred to as the system locator, and has the same
function as the CHECK LED on the operation panel.
Figure 2-10
Location of the system locator
2.4.3 LEDs on each component
Each component incorporates LEDs. If a component experiences an error, check the
LEDs to see which component requires maintenance. Check the LEDs before starting
maintenance work.
The LEDs on each component and the states that they indicate are as follows.
Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021 20