manualshive.com logo in svg

Fujitsu N7100, Operator'S Manual, Page: 390 / 487

Share
Download
Fujitsu N7100 Operator'S Manual Download Page 390

7.3 Other Troubleshooting

390

■

Check item

When an error occurs while scanning with a Carrier Sheet, after the [Scanning with the carrier 
sheet failed. Make sure the document is fully inserted into the top of the carrier sheet and the 
folded edge is on the side marked with the thick line, then try again.] message appears, the 
[Paper jam has occurred. Remove the documents from the ADF and try again.] message 
appears, and scanning fails.    

■

Action

Follow the instructions in the messages, and try again.

■ 

Scanned Data Is Inappropriate

■

Check item
Are the feed rollers dirty?

■

Action

Clean the feed rollers.
For more details, refer to 

"6.3 Cleaning Inside the Scanner" (P.345)

.

■

Check item
Are the feed rollers dirty?

■

Action

Clean the feed rollers.
For more details, refer to 

"6.3 Cleaning Inside the Scanner" (P.345)

.

■

Check item
Is the glass dirty?

■

Action

Follow the steps in 

"Chapter 6 Scanner Care" (P.341)

 to clean the glass.

When scanning with a Carrier Sheet, the [Paper jam has occurred. 
Remove the documents from the ADF and try again.] message appears 
and an error occurs.  

Scanned data is elongated.

Shadow on the leading edge of the scanned data.

Vertical line on the scanned data.

Summary of Contents for N7100








































































































































































































































































































































































































































































































Reviews:

No comments