Fujitsu N7100, Operator'S Manual, Page: 178 / 487

4.17 Maintaining the System
178
■
Checking for Updates at Scanner Startup
You can set the function for automatically checking for updates each time the scanner is
started.
1. Select [System Update] under [Maintenance].

The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
■
Requesting e-Mail Notification When a New Update is
Available
The administrator can set to receive an e-mail notification if a new update is released.
1. Select [System Update] under [Maintenance].

The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
3. Select the [Request e-mail notification when a new update is released]
check box.

When a new update is released, an e-mail entitled "Event notification from
Network Scanner
Scanner_Name " is sent to the e-mail address that is set in the
[Alert Notification] window. For details about the e-mail address settings for alert
notification, refer to
"4.17.6 Setting the Destination for Alert Notifications" (page
184) .
HINT
Checking for new updates is also performed when the scanner enters standby mode.