manualshive.com logo in svg

Fujitsu N7100, Operator'S Manual, Page: 372 / 487

Share
Download
Fujitsu N7100 Operator'S Manual Download Page 372

7.2 Network Connection Troubleshooting

372

■

Details

Communication with the Ping target is not stable.

There may be problems in the hardware transmission path. For example, the LAN cable may 
have become disconnected during the ping test.

■

Action

Check the status of the LAN cable or replace the LAN cable and try again.

When connected to a HUB, change the port to which the LAN cable is connected and try 
again.

The network transmission mode may differ from the connection target. In 

"4.7.7 Configuring 

Network Advanced Settings" (P.108)

, change [Link Speed/Duplex Mode] from "Auto-

Negotiation" to a fixed mode.

■

Details

The name-resolution or address-resolution for the device specified as the Ping target may have 
failed.

■

Action

Check that the Ping target host name or FQDN is correct.

Check that the DNS server or WINS server settings are correct.

If the Ping target host name or FQDN is correct, refer to 

"Failure to Connect to a Server Using 

Its Host Name or FQDN" (P.378)

 for further solutions.

"Ping statistics" shows
"Lost=

N

 (1 to 99% loss)".

"Ping request could not find host xxxxxxxxx. Please check the name 
and try again."

Summary of Contents for N7100








































































































































































































































































































































































































































































































Reviews:

No comments