6
CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS
1.4
RS-232C Port Specifications
The emulator can be connected to one RS-232C cable.
■
RS-232C Port Specifications
Table 1.4-1 "RS-232C Port Specifications" lists the RS-232C port specifications. Figure 1.4-1
"RS-232C Connector Circuit Configuration" shows the connector circuit configuration.
For information on Interlink cable connection, see Section 1.10 "Options".
Figure 1.4-1 RS-232C Connector Circuit Configuration
Table 1.4-1 RS-232C Port Specifications
Item
Description
Connector type
D-Sub 9-pin male
Signal definition
DTE (same as for a personal computer)
Baud rate*
9600, 19.2 K, 115.2 K [bps]
Data bit length
8 bits
Stop bit length
1 bit
Parity bit
None
X control
None
*
:
The possible values depend on the emulator debugger specifications. For more
information, see the
Softune Workbench Operation Manual
.
To internal circuits of emulator
The emulator uses pin assignments that do not use some signal
lines, as shown above.
Note:
Summary of Contents for MB2147-01
