50
(9) Print head replacement
Caution Hot
At printing or after printing, print head is high
temperature. Don
ʼ
t touch the print head still cool.
Removal
1. Turn off the printer.
2. Open the front cover of the printer and remove the ribbon cartridge.
3. Pull the left end of the head lock wire forward to release it from the hook at the left of the print head carriage.
4. Then release the wire from the center hook.
5. Release the wire (under the head) on the left side.
Figure 4.20 Print head removal
6. Remove the print head from the connector on the carriage, as shown in the figure below.
Figure 4.21 Removing the Print head from connector
Installation
1. Install the print head by reversing the removal procedure.
Summary of Contents for Impact 3650
Page 112: ...112 ...
