106
4.9.3 Lubrication
Lubrication is required only when the printer is overhauled or mechanical components are replaced.
Lubrication codes are as follows:
2 – GD – D – O
Cycle
Amount (1 drop)
Type (Mobil oil)
No.
1. No.
Sequential number for the location to be lubricated
2. Type
A: Alvania EP grease 2
FL: Floil
KF: Silicone (KF96SP manufactured by Shinetsu))
SG: Silicone grease
3. Amount
C: Thin
uniform
film
D: 1
drop
F: Fill the case or oil wick.
S: Several
drops
4. Cycle
O: At overhaul
(1) Upper angle
No. Oil Amount
Lubrication
cycle
Location Remarks
1
SG
C
O
Front and rear surface of the upper angle
Area of phantom line
Figure 4.82 upper angle lubrication
Summary of Contents for Impact 3650
Page 112: ...112 ...
