FibreCAT TXF
Operating Manual
37
Installation
Connecting the backup subsystem
3.7.2.2
Connecting SAS cables
Ê
Shut down the server.
Ê
You can assign up to four SAS ports on your backup subsystem (see
figure
“Ports on a SAS/SATA backup subsystem” on page 34
). You must ensure
that Channels A to D are assigned in the correct order.
For the factory-provided SAS configuration, the connectors on the rear side and
the drives on the front are connected 1:1.
I
The change of these settings (drive / connector correlation )should only
be performed by our service team or by a technical specialists
3.7.2.3
Connecting USB cables
Ê
You can assign up to four USB ports on your backup subsystem (see
figure
“Ports on an USB backup subsystem” on page 34
).
For the factory-provided USB configuration, the connectors on the rear side and
the drives on the front are connected 1:1.
I
The change of these settings (drive / connector correlation )should only
be performed by our service team or by a technical specialists
Connector D - Drive 3
Connector D - Drive 4
Connector A
- Drive 1
Connector B
- Drive 2
Connector C - Drive 3
Connector D - Drive 4
Connector A
- Drive 1
Connector B
- Drive 2
Connector C - Drive 3
Connector D - Drive 4
Summary of Contents for FibreCAT TXF
